background image

F6 OWNER’S MANUAL 

  39 

   

 

 

 

Pull the control lever of windshield wiper 
back to clean the windshield; the syringe 
will spray water, the wiper work at the some 
time. The syringe will stop immediately 
when you release the control lever, but the 
wiper still swing three times.

 

 
 
 
 
 
 
 
 
 

Caution: 

 

Push the button between the center vents to 
turn on the hazard warning lights (six-way 
flashers). This causes all six indicators 
outside turn signals and both turn indicators 
in the instrument panel to flash. The flash 
light can remind the foot passenger or other 
vehicles that your vehicle may cause 
danger. 
 

 
 
 
 
 
 

 

Rear windshield defogger 

The rear window defogger will clear fog, 
frost, and thin ice from the window. Push 
the defogger button to turn it on and off. 
The indicator in the button comes on to 
show the defogger is on. It shuts off when 
you turn off the ignition. You have to turn 
the defogger on again when you restart the 
vehicle. 
 
Make sure the rear window is clear and you 
have good visibility before starting to drive. 
 
The defogger wires on the inside of the rear 
window can be accidentally damaged. 
When cleaning the glass, always wipe side 
to side. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for F6
























































































































































































































Reviews: