BWT OCTO +450, Installation And Operating Instructions Manual

Page: 39 / 44

39/44
2020/09- Version: L Code : 97112223
HOTLINE
BWT myPOOL TROPIC WOODEN POOLS
• Leaks caused by running the filter at an operating pressure greater than 1.2 bar (use of a pump that
is too powerful, clogged filter medium, etc.), or installing the filter above the water level without a vent
and check valve. (see the installation instructions)
• “stress-cracking” of ABS parts (valve, nuts) caused by surface reactants found in some types of
grease: grease should not be used on these types of components.
• The continuous expulsion of sand if sand with a grain size of less than 0.6 mm is used (the sand
supplied has the correct grain size)..
CAUTION!
Article Subject and scope of the
guarantee
Term of the guarantee as
of the date or purchase
Conditions governing
acceptance of a claim
Pump Motor operation
Operation and leaktightness of
the hydraulic components.
2 years See below + regular cleaning
The following problems, associated with inappropriate use of the pump, are not covered under the terms
of this guarantee:
• Running the pump “dry” (absence of water, clogging of the pre-filter)
• Running the pump without the pre-filter;