BWT OCTO +450, Installation And Operating Instructions Manual

Page: 16 / 44

16/44
2020/09- Version: L Code : 97112223
BWT myPOOL TROPIC WIOODEN POOLS
HOTLINE
26
Ø5 x 80mm
The wooden corbels will support the coping that
will be mounted after the pool is filled. Pre-drill the
wall from inside the pool then attach each wooden
bracket (type L) using 2 screws (5x80mm sachet
R) taking care to position them flush with the top of
the structure. Remove any splinters that may have
been raised during this process.
There is 1 wooden corbel per side (except the side
holding the skimmer). Centre the corbel.
Mount 2 wooden brackets on the wall holding the
skimmer, they should be positioned equidistant
from the skimmer axis. The distance between the 2
brackets varies depending on the pool model, see
the table below.
MODEL D IN CM
+450 / + 540 60
+510 / + 640 75
27
28
Paint the ends of the slats in the corners with a wood
stabiliser to limit deformation over time. This product
is white on application, but becomes colourless
when dry. Drying time is 2 to 3 hours. Apply a second
layer if the temperature is high or if the product dries
too quickly. Follow the safety instructions printed on
the container. Rinse the brush after use.
.
Mount a decorative profile (type H) on the end of
each wall using nails (3.1x75mm) inserted through
evenly spaced holes pre-drilled along the axis of the
profile.
29
Renfort
Profil de finition
To attach the brace from the
outside: locate the screws
100mm from the corner. Use
one screw per slat.
To attach the brace from the
inside: Locate the screws 85mm
from the corner. Use one screw
per slat.
Paint the ends of the slats in all the corners with a wood stabiliser to
prevent deformation over time.