10/44
2020/09- Version: L Code : 97112223
BWT myPOOL
TROPIC WIOODEN POOLS
5
At this point, fit the skimmer or autonomous filtration
unit into the bottom skimmer slat (type D).
The corbels will support the coping that will be
mounted after the pool is filled. Pre-drill the wall
from inside the pool then attach each wooden
bracket (type L) using 2 screws (5x100mm sachet
J) taking care to position them flush with the top of
the structure. Remove any splinters that may have
been raised during this process.
Mount a decorative profile (type H) on the end of
each wall using nails (3.1x75mm) inserted through
evenly spaced holes pre-drilled along the axis of the
profile.
Fit the two slats at aither side of the filtration unit
or fit the op skimmer slat (type E) over the bottom
skimmer slat (type D), and continue around the
pool with 3 type F slats and 4 type G half-slats as
illustrated.
Paint the ends of the slats in the corners with a wood
stabiliser to limit deformation over time.
This product is white on application, but becomes
colourless when dry. Drying time is 2 to 3 hours.
Apply a second layer if the temperature is high or if
the product dries too quickly.
Follow the safety instructions printed on the
container. Rinse the brush after use.
6
7
8
Renfort
Profil de finition
To attach the brace from the
outside: locate the screws
100mm from the corner. Use
one screw per slat.
To attach the brace from the
inside: Locate the screws 85mm
from the corner. Use one screw
per slat.
Paint the ends of the slats in all the corners with a wood stabiliser to
prevent deformation over time.
Summary of Contents for OCTO +450
Page 42: ...Notes 42 44 2020 09 Version L Code 97112223 PISCINE BOIS BWT myPOOL TROPIC HOTLINE...
Page 43: ...Notes 43 44 2020 09 Version L Code 97112223 HOTLINE PISCINE BOIS BWT myPOOL TROPIC...
Page 44: ...44 44 2020 09 Version L Code 97112223 BWT myPOOL TROPIC WIOODEN POOLS HOTLINE Serial number...