BWT OCTO +450, Installation And Operating Instructions Manual

Page: 21 / 44

21/44
2020/09- Version: L Code : 97112223
HOTLINE
BWT myPOOL TROPIC WOODEN POOLS
44 45
Stick the self-adhesive gaskets to the return fitting
and vacuum fitting flanges..
Locate the holes in the throughwall flange and mark
them.
47 46
Screw the flange (fitted with its gasket) into place
using the countersunk SS screws M5x16 from the
pool fitting skin pack. Tighten the screws alternately
to ensure a leaktight fit. Hand tighten, over tightening
could damage the flange.
Cut out the return fitting.
Using a Stanley knife, carefully cut the liner following
the inside of the return fitting.
48 49
Glue the second skimmer gasket to the interior surface of the skimmer flange. (The interior surface has
sharp edges while the exterior surface has rounded edge).
Locate the 4 corner holes of the skimmer mouth and mark them with a pen.
Position the flange such that its corner holes are aligned with the points marked in pen..