Cleaning, maintenance and repairs
V-MIX Fix Plus
Translation of the Original Operating Manual
81
7.5.2
Discharge opening with tight-fitting cover apron (optional)
1. Turn the mixing auger such that the cutting blades
are pointing away from the discharge opening.
2. Completely open the dosing gate of the door
through which you wish to enter the mixing hopper.
3. Switch off the machine and secure it against inad-
vertent restarting.
4. Close the block ball valve (2) on the dosing gate.
5. Loosen the bolt joint (3) between cover apron (4)
and mixing hopper (1).
6. Slightly raise the cover apron (4) to pull the flat iron
of the cover apron out of the bracket (5) (not
shown). You can now swing the apron (4) slightly to
the side.
7. Carefully enter and exit the mixing hopper (1) via
the discharge opening.
8. Re-attach the cover apron (4) properly to the mixing
hopper (1) when all necessary work on the mixing
hopper is complete:
8.1 Swing the cover apron (4) back.
8.2 Slightly raise the cover apron (4) to slide the
flat iron of the cover apron into the bracket (5)
(not shown).
8.3 Screw the cover apron (4) to the mixing hop-
per.
Fig. 7-9
2
4
3
5
1