Cleaning, maintenance and repairs
80
Translation of the Original Operating Manual
V-MIX Fix Plus
7.5.1
Discharge opening with protruding cover apron
1. Turn the mixing auger such that the cutting blades
are pointing away from the discharge opening.
2. Completely open the dosing gate of the door
through which you wish to enter the mixing hopper.
3. Switch off the machine and secure it against inad-
vertent restarting.
4. Close the block ball valve (3) on the dosing gate.
5. Loosen the bolt joint (1) between cover apron (4)
and mixing hopper (2) from bottom to top. You can
now swing the apron (4) slightly to the side.
6. Carefully enter and exit the mixing hopper (2) via
the discharge opening.
7. Re-attach the cover apron (4) properly to the mixing
hopper (2) when all necessary work on the mixing
hopper is complete:
7.1 Swing the cover apron (4) back.
7.2 Screw the cover apron (4) to the mixing hop-
per.
Fig. 7-8
3
4
2
1