Safety instructions
V-MIX Fix Plus
Translation of the Original Operating Manual
15
2.3.4
Replacement and wear parts as well as auxiliary supplies
Replace parts of the machine that are not in proper technical condition without delay.
When doing so, use only original parts made or approved by the manufacturer. When using replacement
and wear parts made by third parties, you are not guaranteed that these parts are designed and
constructed in a way that would ensure operational reliability and safety.
The manufacturer is not liable for any damage caused by using unapproved replacement and wear parts
or auxiliary supplies.
Wear parts are not covered by warranty!
Parts considered wear parts include:
Blades including their holders and fasteners.
Mixing augers, both entire units and parts thereof.
Shear bolts.
Wear parts must be subjected to regular measurements / visual inspections at 4-week intervals.
If experiencing extensive wear, you can interchange the mixing augers fitted on a multi-spindle machine.
This ensures uniform wear, extending the overall service life of the mixing augers.
2.3.5
Warranty and liability
Our "Terms of Sales and Delivery" apply as a general rule. The owner has received these terms no later
than by the time the contract was concluded.
Warranty and liability claims are excluded in cases of personal injury and property damage that can be
attributed to one or several of the following causes:
Improper use of the machine,
Improper installation, commissioning, operation and maintenance of the machine,
Operating the machine with defective safety devices or improperly mounted or non-operational
safety devices and guards,
Failure to observe the information provided in the operating manual regarding commissioning,
operation and maintenance,
Unauthorized structural modifications on the machine,
Insufficient monitoring of machine parts that are subject to wear,
Improperly performed repairs,
Natural disasters caused by the impact of foreign objects and force majeure.