Contents
6
Translation of the Original Operating Manual
V-MIX Fix Plus
4.6
Mixing and dispenser unit
41
4.6.1
Mixing auger with cutting blades
42
4.7
Discharge area (discharge opening)
43
4.8
Conveyor belt (optional)
44
4.9
Cross conveyor (optional)
44
4.10
Counter blades
45
4.11
Weighing system (optional)
46
4.12
Hydraulic unit (optional)
47
4.12.1
Electrohydraulic control block
47
4.13
Hydraulic hand pump (optional)
48
4.14
Oilcooling
49
4.15
Control switch cabinet
50
4.15.1
Main switch
51
4.15.2
Emergency stop button
51
4.15.3
Operating elements and controls
52
4.15.4
Display
53
4.16
Safety devices and guards
55
4.16.1
Cover aprons
55
4.16.2
Block ball valve
56
4.16.3
Motor and main drive shaft protective plates
56
4.16.4
Emergency stop button
56
5
Transport, setup, and initial commissioning
57
5.1
Scope of delivery as supplied
57
5.2
Loading and unloading the machine using lifting devices
58
5.3
Machine setup
59
5.4
Connecting the electrical system
61
5.5
Checking the machine for proper operation
61
6
Use and operation
62
6.1
Switching the machine on
62
6.1.1
Switching on after emergency stop or fault
62
6.2
Starting and ending the mixing process
63
6.3
Filling the mixing hopper
64
6.3.1
Recommended order during filling
65
6.4
Discharging fodder
66
6.4.1
Removing clogs
68
6.5
Starting and ending cleaning mode
69
7
Cleaning, maintenance and repairs
70
7.1
Cleaning
71
7.2
Lubricating
71
7.2.1
Lubrication points
72
7.3
Maintenance schedule
–
overview
73
7.4
Oil change at the gear unit
74
7.4.1
Gear unit Brevini ECS1512
75
7.4.2
Gear unit Brevini EM1065
76
7.4.3
Gear unit Comer PGA1602
77
7.4.4
Reduction gearbox BvL 108960 (special equipment)
78
7.5
Entering the mixing hopper
79
7.5.1
Discharge opening with protruding cover apron
80
7.5.2
Discharge opening with tight-fitting cover apron (optional)
81
7.5.3
Discharge opening with tight-fitting cover apron and conveyor belt (optional)
82
7.6
Installation and positioning of the mixing augers
82