Bush Hog RTX85G, Operator'S Manual

Page: 49 / 72

OPERATION
RTXG SERIES TILLER 5/19 Operation Section 4-17
O
PE
R
AT
IO
N
© 2020 Alamo Group Inc.
Tiller PRE-OPERATION Inspection
Tiller ID#________________________ Make__________________________
Date:___________________________ Shift___________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation
has stopped and the tractor is in park with the parking brake engaged. Make sure
the blade is resting on the ground or securely blocked up and all hydraulic pressure
has been relieved.
Operator’s Signature:_____________________________________________________
Table 1:
Item
Condition at
Start of Shift
Specific Comments if
not O.K.
The Operator’s Manual is in the Canister on the
All Safety Decals are in place and legible.
The Hitch connection bolts & pins are tight.
There are no cracks in Hitch.
The Tiller deck is clear of mud, dirt and debris
Chain guards/Deflectors are in place & in good
Driveline/Gearbox shields are in good condition
Driveline clutches are in good condition, not fro -
Driveline telescoping members & u-joints are
Driveline yokes are securely attached to PTO &
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Tiller shaft bearings bolts are tight
Bearings are lubricated
Tiller tines are not chipped, cracked or bent
Tiller tines are tight
Rear deflector shield is in place and in good con -
DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT