OPERATION
RTXG SERIES TILLER 5/19
Operation Section 4-23
O
PE
R
AT
IO
N
© 2020 Alamo Group Inc.
13. DRIVING THE TRACTOR AND IMPLEMENT
Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and
precautions to take while driving with an attached implement. Ensure the tractor has the capacity to handle the
weight of the implement and the tractor operating controls are set for safe transport. To ensure safety while
driving the tractor with an attached implement, review the following.
OPS-U- 0012
11. IMPLEMENT STORAGE
Properly preparing and storing the implement at the end of the season is critical to maintaining its appearance
and to help ensure years of dependable service. The following are suggested storage procedures:
•
Thoroughly clean all debris off the implement to prevent damage from rotting grass and standing water.
•
Lubricate all implement grease points and fill gearbox oil levels as detailed in the maintenance section.
•
Tighten all bolts and pins to the recommended torque.
•
Check the implement for worn and damaged parts. Perform repairs and make replacements immediately
so that the implement will be ready for use at the start of the next season.
•
Store the implement in a clean, dry place with the implement housing resting securely on blocks or at
ground level.
•
Keep the driveline yoke from sitting in water, dirt and other contaminants.
•
Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the
implement.
It is critical that driveline clutches slip when an obstacle or heavy load is encountered to avoid implement and/
or tractor damage. If the implement sits outside for an extended period of time or is exposed to rain and/or
humid air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or
corrosion. If the implement has been exposed to such conditions, at the start of each operating season, and
any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as detailed
in Seasonal Clutch Maintenance of the maintenance section in this manual.
OPS-T-0010
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)
12. TRANSPORTING THE TRACTOR AND IMPLEMENT
Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind
when you finish working in an area. Therefore, the operator must employ good judgement and safe operation
practices when transporting the tractor and implement between locations. By using good judgement and
following safe transport procedures, the possibility of accidents while moving between locations can be
substantially minimized.
OPS-U- 0017
Summary of Contents for RTX85G
