![background image](http://html1.mh-extra.com/html/bush-hog/rtx85g/rtx85g_operators-manual_2834873030.webp)
ASSEMBLY
RTXG SERIES TILLER 5/19
Assembly Section 3-4
A
SS
EM
B
LY
© 2020 Alamo Group Inc.
DRIVELINE ATTACHMENT
Before installing driveline to tiller, make sure all dirt, paint and grease are removed from the gearbox shaft. To
ease in the installation, a light coat of grease may be applied to the gearbox shaft after cleaning.
1. Remove the M12-1.25 x 65 Capscrew, M12 Lockwasher and M12- 1.25 Hex Nut from the slip clutch yoke
end and retain for re-installation.
2. Remove the Slip Clutch Shielding attached to the front of the gearbox housing
3. Slide slip clutch yoke end of driveline onto the gearbox shaft.
4. Align the hole in the yoke of the slip clutch with the groove around the gearbox shaft.
5. Place the M12-1.25 x 65 Capscrew through the yoke and through the groove in the shaft. Attach the M12
Lockwasher and the M12 Hex Nut to the Capscrew and tighten.
6. Re-install the Slip clutch Shielding..
IMPORTANT: Scan this QR Code with your smart phone to link to the ADMA Driveline
Safety Manual for more information on the safe use of a driveline during normal
operation and maintenance. Or type in your internet browser the following web
address: www.algqr.com/dme
Ops-0009-MISC
Summary of Contents for RTX85G
