Burster RESISTOMAT 2408, Manual, Page: 55 / 90

Model 2408
RESISTOMAT
®
Page 55
It is possible to store about 25 sets of test conditions in the 2408’s memory, and more than
1000 setups can be stored on a flash drive via the USB port. Increasing the quantity of se
-
tups results in a slower retrieval process.
To save a set of test conditions externally, select [USB] from the menu in Figure 2-24. You
can save a new setup or overwrite an existing one on the flash drive. Pressing [CNCL] re -
turns the menu to the setups stored in internal memory, Figure 2-22.
2.6.4.2 Recall Setup
Figure 2-25: Recall Setup Test Conditions
Allows a previously stored set of test conditions to be recalled from instrument memory.
Test conditions are those that are user programmable in the Setup and I/O menus and sa-
ved as discussed above. To recall a set of test conditions one needs to arrow down or up
to the desired set.
DEFAULT is always one of the set of test conditions that can be recalled
as discussed in the previous paragraph. Selecting
[USB]
allows setups to be recalled from
a flash drive if one is connected. Selecting [del] will delete a set of test conditions and re-
quires a Yes or No confirmation.
 
Display Type
page
down
de
l
Setup I/0 Utilities
Recall
DEFAULT
USB
2408 - 1
2408 - 2
2408 - 3
2408 - 4
2408 - 5