Burster RESISTOMAT 2408, Manual, Page: 51 / 90

Model 2408
RESISTOMAT
®
Page 51
When multiple tests are being conducted, the results are stored to the flash drive periodi -
cally (every 10 measurements) from an internal buffer.
CAUTION
To store all results, close the file before shutting down the power.
To keep measurement results consistent with the setup conditions, close the file before
changing or recalling a new set of test conditions.
The measurement results (one for each complete measurement cycle) are stored as a DOS
text file under its assigned identifying number (up to 8 characters) with an extension of
.65R. The test setup conditions are saved as a header at the beginning of a results file. A
sample file format is shown below. Notice that the results can be stored in either engineer
-
ing or scientific terms, depending on what the user has selected for setup conditions.
100.000000 ;voltage
0.000000 ;charge time
0.000000 ;dwell time
0.000000 ;measure time
0.000000 ;discharge time
0.000000 ;mode (0 = auto, 1 = manual)
0.000000 ;range
1000000.000000 ;limit
0.000000 ;stop on pass
1 ;# to average
0.000000 ;display type
.000000 ;result format
3.000000 ;baud rate (0 = 1200, 1 = 2400, 2 = 4800, 3 = 9600)
0.000000 ;parity
1.000000 ;data bits
0.000000 ;stop bits
4.000000 ;IEEE address
1.000000 ;IEEE mode
0.000000 ;IEEE state
1.000000 ;handler
0.000000 ;result to USB
1.000000 ;backlight (0 = off, 1 = on)
ENDHEADER