Burster RESISTOMAT 2408, Manual, Page: 29 / 90

Model 2408
RESISTOMAT
®
Page 29
1.4.4 Safety Inspection
Before operating the instrument inspect the ac power inlet module on the
rear of the 2408 instrument to ensure that the properly rated fuse is in place , otherwise
damage to unit is possible. Refer to paragraph 1.4.3.
The 2408 instrument is shipped with a standard German power cord with 3-wire plug and
CE units are supplied with an approved international cord set. Make sure the instrument is
only used with these cables (or other approved international cord set) which ensures the
instrument is provided with
connection to earth ground.
When the 2408 instrument is used in a rack installation (using the 2408-Z001 Rack Mount
Kit) make sure the unit is
secured using the cabinet mounting rails and not secured
solely by the front panel angle brackets.
In bench or rack mount applications the instrument should be positioned with consideration
for
ample air flow
to the rear panel ventilation holes. An open space of at least 3 inches
(75 mm) is recommend behind the rear panel. The surrounding environment should be free
from excessive dust to prevent contamination of electronic circuits.
WARNING
If this instrument is used in a manner not specified in this manual, protection to the
operator and equipment may be impaired.
Read this instruction manual in full before operating this instrument.