Burster RESISTOMAT 2408, Manual, Page: 50 / 90

RESISTOMAT
®
Model 2408
Page 50
2.6.3.4 IEEE-488.2
Figure 2-20: IEEE-488.2 Interface Setup
Allows user setup of IEEE-488.2 interface operation. Selections include:
Address: 1 through 16
Mode: Talk or Talk/Listen
State: Disable or Enable
The instrument will function as either a Talk or a Talk/Listen device in a system depending
on the choice made by the operator under Mode. Talk is generally suited to a simple system
with no controller or other talkers, for example a printer. Talk/Listen denotes full program-
mability and is suited for use in a system that has a controller or computer to manage data
flow. The “handshake” routine assures that the active talker proceeds slowly enough for
the slowest listener.
2.6.3.5 Handler
Allows user to turn Handler Interface function ON or OFF. When off is selected, input and
output lines on the rear panel I/O interface connector are ignored
2.6.3.6 Saving Measurement Results via USB
The user can store measurement results on a USB flash drive. When selected, if a results
file is not open, the user is prompted for the filename (up to 8 characters) and the file is
opened.
To close a results file that is currently open, select Results to USB and press [ ENTER ] to
close. Display indicates “
Closing the Results File
”.
If the user leaves the file open, when the setup is recalled the user will be prompted for a
file name.


Setup I/0 Utilities
IEEE488
Address = 4
Mode Talk Talk/Listen
State Disable Enable