manualshive.com logo in svg

Burkert 8640, Operating Instructions Manual

The Burkert 8640 is a cutting-edge device delivering exceptional performance. Get started with ease by downloading the Quick Start Manual from our website, completely free. This comprehensive manual provides step-by-step instructions to effortlessly set up and operate your Burkert 8640, ensuring an optimal user experience.

Share
Download
background image

Addresses of BC offices/Adressliste BC Länder 

APAC

BC-AUS

Australia, Australien

BURKERT CONTROMATIC AUSTRALIA PTY, LIMITED
2 Welder Road
Seven Hills, NSW 2147
AUSTRALIA
Phone: Int. (+61 2)1300 888 868, Nat.(02)1300 888 868
Fax:

Int. (+61 2)1300 888 076, Nat.(02)1300 888 076

E-mail: [email protected]

Victoria
BURKERT CONTROMATIC AUSTRALIA PTY, LIMITED
Unit 11/26-30 Howleys Road
Notting Hill Victoria 2168
Phone: Int. (+61 3)85459700, Nat. (03)85459700
Fax:

Int. (+61 3)95626599, Nat. (03)95626599

Queensland
BURKERT CONTROMATIC AUSTRALIA PTY, LIMITED
Unit 4/43 Sandgate Road
Albion Queensland 4010
Phone: Int. (+61 7)33269600, Nat. (07)33269600
Fax:

Int. (+61 7)32628801, Nat. (07)32628801

Western Australia
BURKERT CONTROMATIC AUSTRALIA PTY. LIMITED
104 Westpoint, 396 Scarborough Beach Road
Osborn Park Western Australia 6017
Phone: Int. (+61 8)94443980, Nat. (08)94443980
Fax:

Int. (+61 8)94449353, Nat. (08)94449353

BC-CN

China, China

Burkert Contromatic (Shanghai), Co.,Ltd.
Room J1, 3rd floor
207 Tai Gu Road
Wai Gao Qiao Free Trade Zone
Shanghai 200131
P. R. China
Phone: Int. (+86 21)5868 21 19, Nat. (21)5868 21 19
Fax:

Int. (+86 21)5868 21 20, Nat. (21)5868 21 20

E-mail: [email protected]

Beijing
Burkert Contromatic (Shanghai), Co., Ltd.
Room 808, Jingtai Building
No. 24, Jian Guo Men Wai Da Jie
Beijing P. R. China, 100022
Phone: Int. (+8610)6515 6508, Nat. (10)6515 6508
Fax:

Int. (+8610)6515 6507, Nat. (10)6515 6507

Chengdu
Burkert Contromatic (Shanghai), Co., Ltd.
Room 603-604, Fuji Building
26 Dongfeng Road, Shudu Dadao
Chengdu P. R. China, 610061
Phone: Int. (+8628)84439064, Nat. (28)84439064
Fax:

Int. (+8628)84451341,  Nat. (28)84451341

Guangzhou
Burkert Contromatic (Shanghai), Co., Ltd.
Room 1502, Tower 4, Dong Jun Plaza
828 - 836 Dong Feng Road East
Guangzhou P. R. China, 510080
Phone: Int. (+8620)87698379, Nat. (20)87698379
Fax:

Int. (+8620)87671131,  Nat. (20)87671131

Shanghai
Burkert Contromatic (Shanghai), Co., Ltd.
Room 27E, Shanghai Industry Building
No. 18 Caoxi Bai Road
Shanghai P. R. China, 200030
Phone: Int. (+8621)64865110, Nat. (21)64865110
Fax:

Int. (+8621)64874815, Nat. (21)64874815

Suzhou
Burkert Contromatic (Shanghai), Co., Ltd.
Room 5, #06-06
Block A, No. 5 Xinghan Street
SIP Suzhou P. R. China, 215021
Phone: Int. (+86512)67611916, Nat. (512)67611916
Fax:     Int. (+86512)67611120, Nat. (512)67611120

BC-HKG (China) Hong Kong, Hongkong

Burkert Contromatic (China/HK) Ltd.
Unit 708 Prosperity Centre,
77 - 81, Container Port Road
Kwai Chung, N.T., HONG KONG
Phone: Int. (+852)248 012 02, Nat. 248 012 02
Fax:

Int. (+852)241 819 45, Nat. 241 819 45

E-mail: [email protected]

BC-IND

India, Indien

Burkert Contromatic PVT Ltd.
Apex Towers
1st Floor, No. 54 II Main Rd
RA Puram
Chennai 600 028
INDIA
Phone: Int. (+91 044)52303456, Nat. (044)52303456
Fax:

Int. (+91 044)52303232, Nat. (044)52303232

E-mail: [email protected]

BC-J

Japan, Japan

Burkert Ltd.
1-8-5 Asagaya Minami
Suginami-ku
Tokyo 166-0004
JAPAN
Phone: Int. (+81 3)5305 3610, Nat. (03)5305 3610
Fax:

Int. (+81 3)5305 3611, Nat. (03)5305 3611

E-mail: [email protected]

BC-KOR

Korea,  Korea

Burkert Contromatic Korea Co., Ltd.
C-401, Micro Office Bldg. 554-2
Gasan-Dong, Keumcheon-Gu
Seoul 153-803
KOREA
Phone: Int. (+82 2)3462 5592, Nat. (02)3462 5592
Fax:

Int. (+82 2)3462 5594, Nat. (02)3462 5594

E-mail: [email protected]

BC-TT

Malaysia, Malaysia

BURKERT CONTROMATIC SINGAPORE PTE. LTD.
2F-1, Tingkat Kenari 6
Sungai Ara
11960 Penang
MALAYSIA
Phone: Int. (+60 4)643 5008, Nat. (04)643 5008
Fax:

Int. (+60 4)643 7010, Nat. (04)643 7010

E-mail: [email protected]

BC-NZ

New Zealand, Neuseeland

BURKERT CONTROMATIC NEW ZEALAND LIMITED
2A, Unit L, Edinburgh Street
Penrose, Auckland
NEW ZEALAND
Phone: Int. (+64 9)622 28 40, Nat. (09)622 28 40
Fax:

Int. (+64 9)622 28 47, Nat. (09)622 28 47

E-mail: [email protected]

Summary of Contents for 8640





































































































































































































Reviews:

No comments

Related manuals for 8640

DAV TECH DA 250 Installation And Maintenance Manual preview
DA 250
Brand: DAV TECH Pages: 10
QCON ProX Setup preview
ProX
Brand: QCON Pages: 4
B&G WR10 Quick Reference Manual preview
WR10
Brand: B&G Pages: 2
B&K SR10.1 Operation Manual preview
SR10.1
Brand: B&K Pages: 9
M-Audio Axiom AIR 25 Service Manual preview
Axiom AIR 25
Brand: M-Audio Pages: 26
M Climate Bobbie Installation Instructions Manual preview
Bobbie
Brand: M Climate Pages: 12
Dantherm CC 3000 Manual preview
CC 3000
Brand: Dantherm Pages: 20
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Brand: Daikin Pages: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Brand: Daikin Pages: 26
LST Extinguishing Control Panel BC06-2EXT Brochure & Specs preview
Extinguishing Control Panel BC06-2EXT
Brand: LST Pages: 4
Becker Centronic SunWindControl SWC245-II Assembly And Operating Instructions Manual preview
Centronic SunWindControl SWC245-II
Brand: Becker Pages: 52
Aqua Lung Cousteau/ SEA Service & Repair Manual preview
Cousteau/ SEA
Brand: Aqua Lung Pages: 24
Hansen H5600A Specifications, Applications, Service Instructions & Parts preview
H5600A
Brand: Hansen Pages: 4
Ultralife URB0001 User Manual preview
URB0001
Brand: Ultralife Pages: 11
Oriental motor A Step AZ Series User Manual preview
A Step AZ Series
Brand: Oriental motor Pages: 120
Feig Electronic ID ISC.MU02.02-AD Manual preview
ID ISC.MU02.02-AD
Brand: Feig Electronic Pages: 96
Rockwell Automation Allen-Bradley 1784-KT2/B Installation Data preview
Allen-Bradley 1784-KT2/B
Brand: Rockwell Automation Pages: 32
Idesco 9CD 3.0 User Manual preview
9CD 3.0
Brand: Idesco Pages: 7

Brands by name

Popular brands

Load more brands