Burkert 8640, Operating Instructions Manual

Page: 50 / 196

48 - 8640
PROFIBUS-DP
Byte 8 (0)
Byte 8 (0) must be looked at more closely. It is of decisive impotance whether the input mode and filter
are retained according to the settings by DIP switch or EEPROM, or whether a further change is to be
made during parametrization.
- without change of the input mode / filter
On making the settings in the parameter telegramme, the following values are permissible:
Short diagnosis Long diagnosis
Bit-bye-bit composition 01 hex 81 hex
Byte-No. Description
8 (0) Input mode / input filter / diagnosis see below
9 (1) No. of bits, inputs main battery
10 (2) No. of bits, outputs main battery
11 (3) No. of bits, inputs extension battery 0
DIP switch on eb 0: S1=OFF, S2=OFF, S3=OFF
12 (4) No. of bits, outputs extension battery 0
13 (5) No. of bits, inputs extension battery 1
DIP switch on eb 1: S1=ON, S2=OFF, S3=OFF
14 (6) No. of bits, outputs extension battery 1
15 (7) No. of bits, inputs extension battery 2
DIP switch on eb 2: S1=OFF, S2=ON, S3=OFF
16 (8) No. of bits, outputs extension battery 2
17 (9) No. of bits, inputs extension battery 3
DIP switch on eb 3: S1=ON, S2=ON, S3=OFF
18 (10) No. of bits, outputs extension battery 3
19 (11) No. of bits, inputs extension battery 4
DIP switch on eb 4: S1=OFF, S2=OFF, S3=ON
20 (12) No. of bits, outputs extension battery 4
21 (13) No. of bits, inputs extension battery 5
DIP switch on eb 5: S1=ON, S2=OFF, S3=ON
22 (14) No. of bits, outputs extension battery 5
23 (15) No. of bits, inputs extension battery 6
DIP switch on eb 6: S1=OFF, S2=ON, S3=ON
24 (16) No. of bits, outputs extension battery 6
25 (17) No. of bits, inputs extension battery 7
DIP switch on eb 7: S1=ON, S2=ON, S3=ON
26 (18) No. of bits, outputs extension battery 7
Stan-
dard Siemens