Burkert 8640, Operating Instructions Manual

Page: 57 / 196

8640 - 55
PROFIBUS-DP
HI Main battery on the PROFIBUS-DP
Example: Hl: DIP-6 main battery DIP switch 6
EIn Extension battery n on the RIO bus (n = 0 bis 7 )
Example: El0: DIP-4 extension battery with Address = Switch 4
DIP-n
DIP switch number of the corresponding valve battery
(at the right on the field bus module) 0:= OFF; 1:=ON
24 V Out
The 24V output control voltage is missing on the corresponding valve battery
0:=No fault; 1:=fault
NOK The corresponding extension battery does not log on at the RIO bus
0:=No fault; 1:=fault
Konfig The corresponding extension battery was configured by the Master
0:=Not configured; 1:=configured
Configuration and Parametrisation faults
Configuration fault number Parametrisation fault number
1 Too many inputs (>32) for one battery 1 Too many inputs (>32) entered for one battery
2 Too many outputs (>24) for one battery 2 Too many outputs (>24) entered for one battery
3 Too few inputs for all batteries
(default from parameter telegram)
3 Parametrising telegram too small
4 Too few outputs for all batteries
(default from parameter telegram)
4 Too few outputs for all batteries
5 False configuration byte 5