Burk GSC3000 Installation & Operation Manual Download

Page: 39 / 149

STATUS BAR

The Status Bar on the bottom of the main Lynx window shows information about the current connection. From
left to right, the status bar displays:

•

the name of the site and unit you are connected to

•

the current view (either “Default View” or the name of the custom view)

•

the time the last data update was received from the site

•

the percentage of data packets received successfully

•

the name of the current user and the user’s privilege level

Warning icons appear in the Last Update field to alert you to a possible connection problem. In the Last Update
Field, a yellow alert icon indicates Lynx has missed one data update, and a red icon indicates Lynx has missed two
or more updates.

There are similar icons in the Link Quality field to alert you to a weak connection.

CHAPTER 3: LYNX SOFTWARE OVERVIEW

CUSTOMER SUPPORT: 978-486-3711 • [email protected] • www.burk.com

Summary of Contents for GSC3000






















































































































































Search results

Summary of Contents for GSC3000

Reviews:

Related manuals for GSC3000

Brands by name

Popular brands

Burk GSC3000, Installation & Operation Manual

Search results

Summary of Contents for GSC3000

Reviews:

Related manuals for GSC3000

Brands by name

Popular brands