Burk GSC3000, Installation & Operation Manual

Page: 51 / 149

4. When you are finished calibrating the channels, click S Sa avve e tto o U Un niitt to upload the new values to the I/O
unit. To abandon changes, click U Un nd do o C Ch ha an ng ge ess.
When you update a metering value, Lynx compares the old value to the calibrated value and computes a
Calibration Constant to correct readings along the channel’s entire operating range. If you wish to enter your
own calibration constant, click the Advanced button, highlight the desired channel, and enter the calibration
constant at the bottom of the dialog box. Click Set when you are finished, and click Save to upload the new data
to the I/O unit. Click Close to exit.
UNIT PROPERTIES
The Unit Properties window provides details on the unit name, number,
firmware version and connection information. To view properties for a
selected unit, click U
Un niitt P Prro op pe errttiie ess from the expanded Selected Unit item in
the Site menu.
CLEAR CACHE
When Lynx connects to a site, it compares configuration data from the
connected units to the data Lynx has stored in its cca
acch he e. If no changes to
the site’s configuration have taken place since the last disconnect, Lynx uses
the cached unit information so you do not have to wait for it to download
all the settings. There is C
Clle ea arr C Ca acch he e function in the FFiille e menu, which will
delete all configuration data stored in the cache and force Lynx to download
the data the next time you connect to the site. This is a troubleshooting
feature not needed for normal use.
CHAPTER 4: I/O UNIT CONFIGURATION
43
CUSTOMER SUPPORT: 978-486-3711 • support@burk.com • www.burk.com
Unit Properties Window