CCD-Premium
Operating manual
page 14 /24
….... and click Start. The machine will perform a reference
run. With an ATC machine the software will ask for test tool
in the spindle and whether the tools are correctly positioned
in the ATC bar. Again take care that slot 0 is free!
With a manual machine, you are asked to insert the current
tool into the spindle.
After clicking
OK
, the drilling begins. This is fully automatic with an ATC. For manual machines,
the first tool is processed, then the machine moves up into the Z limit switch and you will be
prompted to insert the next tool.
When the drill layer is
finished change to the
routing layer
With click on
Start
the machine again makes a reference
run and the processing is carried out in the same manner as
with drilling.
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/5036, Fax: +49 (0) 2292/6175, E-mail: [email protected]