CCD
Operator's manual
Page 4 /35
•
ATC/XL:
simultaneous
25
out of 99
tools per Job
•
ATC:
drill break detection and length
calibration
Drive system:
•
High load-2x2-phase stepper motors on
all 3 axis for real milling applications and
correct adjustment of the cutting speed
for all tools
•
Maximum position speed per axis:
9000/mm/min (=150 mm/s)
•
Maximum working speed per axis:
9000/mm/min (=150 mm/s), individual
setting for every tool independent from
the positioning speed
•
Step resolution: Software selectable: 1
mil, ½ mil, ¼ mil (= 6.35 Micrometer)
•
Precision: +/- 1 step, typical repeatability ± 0.001 mm (± 0.04 mil)
•
Position accuracy:20 ppm (0.002%) over the entire work space (9,9 µm with a work area of 495 mm)
Software:
•
Fully integrated Windows control software for online machine control in real time, with convenient
user interface, including full tool management and plausibility checks
•
RoutePro3000 for Windows XP - Windows 8 64-bit, project-related work flow, expandable by mod-
ules (laser exposure, fiducial recognition, dispensing and much more. See at:
http://www.bungard.de/index.php?option=com_content&view=article&id=155&Itemid=191&lang=eng-
•
Resolution: 0,0001mm (0,1µm)
•
Use of open format standards such as Excellon or Sieb & Meyer drill data and HP/GL data for milling.
These can be opened and edited with a simple text editor
•
You can individually adjust position speed for X-, Y- and Z-axis as well as the working speed (feed),
spindle speed (RPM) and depth for each tool. This results in:
•
continuous use of the appropriate cutting speed over the entire RPM-range, no need for 100 000
RPM spindles, no excessive wear of expensive bearings
•
All machine parameters (speed, acceleration ramps, X / Y / Z dimensions / scaling, tool break detec-
tion) can be individually set in the RoutePro software
•
Simple Teach-In Function for drill and route data (to copy an existing board)
•
Smallest tool diameter: 0.1 mm (zyl. Micro cutter at 63 000 1/min)
