CCD
Operator's manual
Page 11 /35
MTC, ATC:
Connect the 25-pin and two 15-
pin cable from the controller to the terminals
on the back of the machine. Ensure proper
connection and tighten the screws! The
cables are
not
interchangeable. Do the
same with on the control unit side. After that
connect the RS232 to the PC (possibly via
the USB / serial adapter). At last plug in the
power supply.
ATC
: connect machine to compressed air
supply (6-8 bar, oil free; not included in de-
liver)
CCD/2:
the control unit is underneath the machine. At
the front there a two fans the socket for the RS232 plug
and the diodes for power and the end switches XYZ.
At the back there are the connectors for the vacuum
cleaner start adapter and the power supply. Connect
the machine
with
the
RS232-cable to
the computer (if
needed via
USB/serial con-
verter). After
that connect
the machine with the vacuum cleaner start adapter and
the external power supply.
