CCD
Operator's manual
Page 18 /35
Installation Manual RoutePro3000
System requirements:
CCD with Controller 2006 or younger.
Computer with Windows XP SP3 till Windows 8 64 bit. 900 MHz Processor, 500MB main memory
and 100 MB free disc space.
Internet connection during setup and registration. The internet connection is necessary to install
updates like Visual C++ and Framework 4. In addition you need to register your RoutePro3000-
version and, if there, activate licenses for special modules (laser, dispense, calibrate etc.).
After installation you can of course work offline.
Content:
New machines:
all necessary files including the specific parameters for your machine are packed
into the file “SetupRoutePro3000.exe”, which is located on the delivered CD. If you want to read
the help file prior to installation, you can download the help file from our homepage.
Existing machines with RoutePro2008:
You can download the
current Routepro3000 version with all necessary files including
our standard parameters for machine and tools from the customer
area of our homepage. Please register on our homepage with
your customer ID. If you are not a direct customer, please register
with the name of your dealer and the customer number you have
with him). After installation you have to adapt the parameters for
your machine from RoutePro2008 into RoutePro3000 (correction
factors, table size, values for sensor and tool slots). If you want to
read the help file prior to installation, you can download the help
file from our homepage.
Existing machines with RoutePro3000:
We created a separate
file “UpdateRoutePro3000.exe”. This file does not contain the re-
source data and thus your already existing parameters for ma-
chine and tools will not be overwritten. This Update version can
also be downloaded from our homepage.
Make sure your resource data are in the correct location.
(standard:
C:\Program Files\RoutePro3000\Resources)
Procedure:
Read the manual of RoutePro3000. Connect CCD to your com-
puter. Then install RoutePro3000: Double-click on “SetupRoute-
Pro3000.exe” and follow the routine. Depending on your system
Microsoft Framework 4 and Microsoft Visual C++ will be installed
automatically. If you do not have the latest firmware on your CCD
controller, then your controller will be flashed automatically. A re-
start of RoutePro3000 may be required in this case.
If you use special modules like laser, calibration or dispensing, then please read the special in-
struction for these modules coming with the hardware and refer to the applying help topics in the
RoutePro manual/help system.