PANEL PRO
11
cutting action. The chips are sharp and can easily embed themselves in the skin.
Nitrile gloves are quite effective at keeping chips at bay.
Chips should be flushed off with running water. If flushing with water does not remove
chips, or metal slivers, then rubbing with clean Scotch Brite will often remove small
metal slivers.
Wear safety glasses.
Keep fingers away from moving parts to keep them from getting pinched. When the
pressure builds up the stepper motors will start skipping steps, but a painful bruise
possibly a broken bone could result if fingers (or other parts of the body) are placed
between moving and non moving parts.
Keep fingers away from the router bit. It will cut fast and sure. Again
DO NOT
REMOVE THE GUARD! KEEP FINGERS CLEAR!
Software Installation:
There are two applications and the drawing library on your AvCAM disk.
AvCAM:
load the AvCAM CD into your CD drive. If the AvCAM install does not start
automatically, go to Windows Start\run\E:autorun.bat where E is your CDrom drive
number. This batch file installs AvCAM and EasyCAD, sets up the proper folders and
copies the drawing libraries.
We recommend Windows XP or later operating system. A windows 98 operating
system may or may not work. We can not provide any support for a Win98 system.
The initial installation must be accomplished from the CDrom. Note the
application
key
on the CDROM envelope. It will be required on the first time the program is run.
Update installations will not require the application key.
Install EasyCAD:
EasyCAD should automatically install
when AvCAM is installed.
To manually install EasyCAD:
Click Windows Start\run.
Type in E:\EasyCAD75x.exe where E is your cdrom
drive number.
I recommend installing in the default C:\ECW750 folder.
Other files are dependant on this path name.
