PANEL PRO
10
38. Mix about 36 ounces #78 coolant concentrate to 6 gallons of water. Pour it into the
coolant tank.
Recommended computer:
We recommend using a desktop style computer running Windows XP operating system.
While a lap-top will run the Panel Pro, the key pad is used frequently. An external key
pad may be employed, however the Num Lock has to be on to use it, and then it remaps
the main key board so that the U,I,O,J,K,L,M keys are now number keys. If you have to
type in a file name, it becomes awkward switching the num lock on and off.
Also plan to have at least a 17” monitor with about 1024 x 768 pixel setting.
Arrange the computer so that the right hand can be on the keyboard or mouse and
the left hand can reach the middle of the Panel Pro.
CAUTION!
There should be no reason to be injured while operating the Panel Pro if a few simple
precautions and common sense are exercised.
The SC2B is powered by 110vac and switches 110vac for the coolant pump and router.
Any Drain pan leaks should be corrected before further machine use.
Operate only on a dry floor.
Test the GFCI outlet with the router running before each use. Press the test button,
and the router should stop. Press the reset button to resume operation.
Do not operate the machine if the floor in the area is wet.
If any coolant leak is noticed, immediately disconnect the power from the SC2B
from a dry location and repair the leak. Make sure any area where power cords
run are dry.
Under no circumstances should the guard around the router bit be removed while the
router is running. Coolant and metal chips will fly every where.
Eye guards are recommended. As the milling bit performs drilling operations,
sometimes some chips can fly.
Ear protection is required.
We make no claims as to the medical properties of or continued exposure to aluminum.
It is recommended that you avoid contact with the copious chips generated by the
