Bull escalata t430, Setup Manual, Page: 60 / 164

3-18
Setup Guide
Using the Keyboard
There are several keyboards available with the system unit. The keyboards have various
keys that enter data and control the cursor location.
The keyboards can be engraved for the languages of different countries. National languages
can be set through the Open Firmware menu. For further information, please refer to
Select
Keyboard , on page 4-11.
The functions of each keyboard depend on the software used. The character sets for the
keyboards are explained in your operating system documentation.
The keyboard is divided into four sections:
1 Function keys Multipurpose keys controlled by the operating system
2
Typewriter keys Similar to those of a standard typewriter. Their function is
controlled by the software
3 Control keys Move the cursor on the screen and do programmed
control functions. The movement and functions depend
upon the used application
4
Numeric keypad A keypad arranged like a calculator to help when typing
numbers
On all of the keyboards, you can adjust the tilt position for typing comfort. To tilt the
keyboard, pull out the keyboard legs. The legs will snap into position. To decrease the tilt of
the keyboard, rotate the keyboard legs until they snap into the bottom of the keyboard case.
Note: The keyboard plugged into the connector at the rear of the base unit, can be used
only with the system graphic monitor.