Bull escalata t430, Setup Manual, Page: 18 / 164

1-2
Setup Guide
Arranging your Office
We offer you some information for adjusting the furniture in your office.
An adjustable chair with comfortable support is suggested, adjust the chair to fit your body
properly.
Your lower back (lumbar region) should be supported correctly by the back of the chair.
Place your monitor slightly below your eyes level when you are sitting at the keyboard.
Keep an adequate distance from your eyes to the screen about 18 - 28 in. (450 - 700 mm).
Position the monitor to minimize glare and reflections on the screen and, if necessary, use
the screen filter to protect against electrostatic discharge.
Keep your screen clean, to reduce unwanted reflections.
Avoiding Fatigue
A non-direct light of about 500 lm/m
2
(lumen per square meter) measured at a distance of
750 mm from the floor should be enough to work in comfort.
When you are seated since long time, stand up and take a short break to reduce fatigue
and to relax your eyes.
Physical Dimensions
The table below lists the dimension of the system unit and its weight.
Height 24.8 in. 630 mm off the floor
Width 13.9 in. 353 mm
Depth 19.7 in. 500 mm
Weight
121.4 lbs* 55 kg*
* This value corresponds to a maximum system configuration; i.e. including a max. number
of cards and devices.
Clearance
The amount of space needed by the system unit during normal operation is indicated in the
figure below.
508 mm
20 inches
508 mm
20 inches
508 mm
20 inches
In addition, before installing the system, you should keep into consideration also the space
that could be necessary on each side for possible service and maintenance.