Bull escalata t430, Setup Manual, Page: 129 / 164

6-25
Expanding the System Configuration
10.Lightly push the drive towards the front side of the disk carrier to seat the screws in the
locking brackets (A). Secure the hard disk drive by tightening first the screws on the right
side (B) and then the screws on the left side of the disk carrier (C).
11. Grip the light duct support and slide it into its slide-way until a click tells you that it is well
seated.
12.Firmly grip the disk carrier and slide it inside the empty slot of the disk cage.
13.Tilt the latches until these are anchored to the disk cage and lock the disk carrier by
closing the latches.
14.Refer to Hard Disk Drive SCSI-ID , on page 5-11, to know the SCSI-ID identification that
the hard disk drive will acquire.