38
EN
M1.2.MRD500H.NLFREN - 08022018
WARNING!
Always release the clutch control lever before changing speeds.
Failure to do so will result in damage to the mini tracked dumper.
Slower speeds are for heavier loads, while faster speeds are for transporting light loads or an empty hopper. It is
recommended that you use a slower speed until you are familiar with the operation of the mini tracked dumper.
If the engine slows down under a load or the tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift the machine into a lower gear. If the front continues to ride up, lift up on the handles.
Left/right steering lever
Operate the lever to turn left/right.
WARNING!
Operate the steering levers only at a reduced speed.
Gear selection lever
The gear selection lever has 4 positions: 3 forward speeds and 1
reverse. To change speeds, move the speed shift lever to the desired
position. The lever locks in a notch at each speed selection.
MINI TRACKED DUMPER
11
GB
Gear Selection Lever
The gear selection lever has 4 positions: 3
forward speeds and 1 reverse. To change
speeds, move the speed shift lever to the
desired position. The lever locks in a notch at
each speed selection.
Hydraulic Tipping Handle
Using your left hand, pull the locking plate
up to release the tipping handle, and hold in
position.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads
or an empty hopper. It is recommended that
you use a slower speed until you are familiar
with the operation of the mini tracked dumper.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift
the machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Always release the clutch control
lever before changing speeds.
F a i l u r e t o d o s o w i l l r e s u l t i n
damage to the mini tracked dumper.
Operate the steering levers only at
a reduced speed.
C
A
B
Locking Plate
Hydraulic Tipping Handle
To raise the hopper, pull the tipping handle
upwards until the hopper has reached the
desired position. To stop raising the hopper,
simply release the tipping handle and return
the locking plate to its original position.
To lower the hopper, first pull the locking plate
up with your left hand to release the tipping
handle, and then pull the tipping handle
down with the right hand. When the hopper
is lowered to the original position, release the
tipping handle back to its original position and
lock securely with the locking plate.
09735UK00M110.indd 11
2017/12/20 16:56:22
MINI TRACKED DUMPER
11
GB
Gear Selection Lever
The gear selection lever has 4 positions: 3
forward speeds and 1 reverse. To change
speeds, move the speed shift lever to the
desired position. The lever locks in a notch at
each speed selection.
Hydraulic Tipping Handle
Using your left hand, pull the locking plate
up to release the tipping handle, and hold in
position.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads
or an empty hopper. It is recommended that
you use a slower speed until you are familiar
with the operation of the mini tracked dumper.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift
the machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Always release the clutch control
lever before changing speeds.
F a i l u r e t o d o s o w i l l r e s u l t i n
damage to the mini tracked dumper.
Operate the steering levers only at
a reduced speed.
C
A
B
Locking Plate
Hydraulic Tipping Handle
To raise the hopper, pull the tipping handle
upwards until the hopper has reached the
desired position. To stop raising the hopper,
simply release the tipping handle and return
the locking plate to its original position.
To lower the hopper, first pull the locking plate
up with your left hand to release the tipping
handle, and then pull the tipping handle
down with the right hand. When the hopper
is lowered to the original position, release the
tipping handle back to its original position and
lock securely with the locking plate.
09735UK00M110.indd 11
2017/12/20 16:56:22
MINI TRACKED DUMPER
11
GB
Gear Selection Lever
The gear selection lever has 4 positions: 3
forward speeds and 1 reverse. To change
speeds, move the speed shift lever to the
desired position. The lever locks in a notch at
each speed selection.
Hydraulic Tipping Handle
Using your left hand, pull the locking plate
up to release the tipping handle, and hold in
position.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads
or an empty hopper. It is recommended that
you use a slower speed until you are familiar
with the operation of the mini tracked dumper.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift
the machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Always release the clutch control
lever before changing speeds.
F a i l u r e t o d o s o w i l l r e s u l t i n
damage to the mini tracked dumper.
Operate the steering levers only at
a reduced speed.
C
A
B
Locking Plate
Hydraulic Tipping Handle
To raise the hopper, pull the tipping handle
upwards until the hopper has reached the
desired position. To stop raising the hopper,
simply release the tipping handle and return
the locking plate to its original position.
To lower the hopper, first pull the locking plate
up with your left hand to release the tipping
handle, and then pull the tipping handle
down with the right hand. When the hopper
is lowered to the original position, release the
tipping handle back to its original position and
lock securely with the locking plate.
09735UK00M110.indd 11
2017/12/20 16:56:22
Hydraulic tipping handle
Using your left hand, pull the locking plate up to release the tipping handle, and hold in position.
To raise the hopper, pull the tipping handle upwards until the hopper has reached the desired position. To stop raising the
hopper, simply release the tipping handle and return the locking plate to its original position.
To lower the hopper, first pull the locking plate up with your left hand to release the tipping handle, and then pull the tipping
handle down with the right hand. When the hopper is lowered to the original position, release the tipping handle back to its
original position and lock securely with the locking plate.
MINI TRACKED DUMPER
11
GB
Gear Selection Lever
The gear selection lever has 4 positions: 3
forward speeds and 1 reverse. To change
speeds, move the speed shift lever to the
desired position. The lever locks in a notch at
each speed selection.
Hydraulic Tipping Handle
Using your left hand, pull the locking plate
up to release the tipping handle, and hold in
position.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads
or an empty hopper. It is recommended that
you use a slower speed until you are familiar
with the operation of the mini tracked dumper.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift
the machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Always release the clutch control
lever before changing speeds.
F a i l u r e t o d o s o w i l l r e s u l t i n
damage to the mini tracked dumper.
Operate the steering levers only at
a reduced speed.
C
A
B
Locking Plate
Hydraulic Tipping Handle
To raise the hopper, pull the tipping handle
upwards until the hopper has reached the
desired position. To stop raising the hopper,
simply release the tipping handle and return
the locking plate to its original position.
To lower the hopper, first pull the locking plate
up with your left hand to release the tipping
handle, and then pull the tipping handle
down with the right hand. When the hopper
is lowered to the original position, release the
tipping handle back to its original position and
lock securely with the locking plate.
09735UK00M110.indd 11
2017/12/20 16:56:22
copyrighted
document
- all
rights
reserved
by
FBC