Buhnen HB 5010, Translation Of The Original Operating Manual

Page: 65 / 142

Technical Data
7
2 Technical Data
2.1 Type key / Available Versions
HP_ _ _ _ xx
Length
24 = 2.4 m
30 = 3.0 m
45 = 4.5 m
Ø Hose core
0 = 8 mm (Standard)
1 = 6 mm
Type
0 = Manual application unit
for extrusion application
1 = Manual application unit
for spray application
Version
without = Protection hose
from braid
T
max
= 200 °C
HT = High temperature
T
max
= 250 °C
M = Standard corrugated
protection hose
PS = Polyamide corrugated
protection hose
PU = for PU hot melt adhesives
Bild 2.1/1: Type key
2.2 Technical data
Design Standard High temperature (HT)
Supply voltage 230 VAC / 50…60 Hz
Heating capacity (P) up to 3 m hose length: 130 W/m
as of 3 m hose length: 100 W/m
Max. operating temperature (T
max
) 200 °C 250 °C
Temperature sensor PT100
Pressure load capacity (P
max
)
for 8 mm hose core
The stated values have been established by
measurement in stretched condition without
movement. The values will change for mechanical
loads. Especially short, frequently very high pressure
peaks have a negative impact.
Bursting pressure at 24°C Max. hot melt material
pressure:
up to 24 °C
at 100 °C
at 200 °C
at 250 °C
900 bar
200 bar
180 bar
160 bar
-
900 bar
250 bar
225 bar
200 bar
188 bar
Max. spray air pressure (P
max
)
(only with Version HS manual application units)
5 bar
Fitting galvanized steel, 9/16-18 UNF thread, size 19