Maintenance / Servicing
41
5. Figure 8.4/2 and the following table show the position and assignment of the fuses
F1…F8. All fuses are commercially available miniature fuses (5 x 20mm).
Figure 8.4/2: Position of fuses on the power section
Fuse
Value
Function
F1
4 A FF (quick acting)
Pump motor
F3
0.63 A M (medium time-lag)
Controller
F4
6.3 A FF (quick acting)
Heater Hose 1
F5
4 A FF (quick acting)
Heater Pistol 1
F6
6.3 A FF (quick acting)
Heater Hose 2
F7
4 A FF (quick acting)
Heater Pistol 2
6. Insert the screwdriver (approx. 5mm) in the slot of the upper part of the relevant fuse
holder. Lightly press down the upper part of the fuse holder; turn the upper part ap-
prox. 30° counter-clockwise.
7. The upper part with the fuse can now be removed.
8. Inspect the fuse for continuity, e.g. using a multimeter in the smallest resistance mea-
suring range (usually 200 Ω). Replace the defective fuse.
9. Reassembly is carried out in reverse order.
Attention
!
Never
replace (not even for trial purposes) a defective fuse with a different component
(e.g. a piece of wire).
The safe operation of the system cannot be guaranteed after such manipulation: conse-
quential damages are probable!
Only use the fuse types listed in the table above.
Summary of Contents for HB 5010
