Buhnen HB 5010, Translation Of The Original Operating Manual

Page: 142 / 142

Description of maintenance work
8
3.3 Check/replacement of filter cartridge
Required tools: • 1 Allen key 12mm
Spare part: • 1 filter cartridge
(Order No. 3511.06)
Locking screw
with viton seals
Filter cartridge
Figure 3.3/1: Position of filter cartridge
The filter cartridge for the hot melt adhesive is located in the connection block that can be
accessed from the rear of the basic unit.
Figure 3.3/1 shows the position of the filter cartridge in the connection block.
To inspect/replace the filter cartridge, carry out the following work steps:
1. Heat up the tank system to approx. 100°C.
2.
Turn off the tank system and disconnect the mains plug.
3. Release the locking screw with an Allen key (12mm).
4. The filter cartridge can now be removed and checked/replaced.
Reassembly is carried out in reverse order.
Subject to changes © BÜHNEN GmbH & Co. KG/HB_5010_T7__GB_#C/180131/H
BÜHNEN GmbH & Co. KG
Hinterm Sielhof 25
28277 Bremen • Germany
Phone: +49 (0) 421 51 20 - 125
Fax: +49 (0) 421 51 20 - 260
kleben@buehnen.de
www.buehnen.de
Description of maintenance work