Notes:
• If protocols other than “SMB (Win/Mac)” or “Backup” under “LAN Protocol Support” are enabled, the hidden shares
option will be grayed out and cannot be selected.
• Configure hidden share attributes only through Settings. Configuring them through Windows is not supported
and may cause unexpected behavior.
To access a hidden folder, open File Explorer in your computer and enter “\\LinkStation name\shared folder name$\”
into the address bar. For example, if the LinkStation name is “LSXXX001” and the shared folder name is “share”, enter
“\\LSXXX001\share$\” to open it.
Configuring Users
Adding a User
You can add a user from a computer or a mobile device. Follow the appropriate procedure below to add a user.
Note:
You may add up to 300 users, which include the default users “admin” and “guest”.
1
From Advanced Settings, click
File Sharing
.
2
Click the settings icon (
) to the right of “Users”.
3
Click
Create User
.
31
Chapter 2 File Sharing
Summary of Contents for LinkStation 200 Series
