7-16
2006 Buell Lightning: Electrical
HOME
TESTING/REPLACEMENT
Clutch Switch
See
Figure 7-14.
The clutch switch attaches to the clutch con-
trol lever bracket. The switch completes a path to ground for
the ignition relay and the starter relay when the clutch is dis-
engaged. Test the switch as follows:
1.
Unplug the 2-place clutch switch connector [95].
2.
Test the switch using an ohmmeter.
a. With clutch engaged (1) (switch open), the switch
should show
∞
ohms (infinite ohms).
b.
With clutch disengaged (2) (switch closed), the
switch should show 0 ohms or little resistance.
3.
Replace the assembly with a
new
switch if necessary.
See
2.25 CLUTCH CONTROL/CABLE
.
4.
Tighten fasteners to 7-10
in-lbs
(0.8-1.12 Nm).
Figure 7-14. Clutch Switch
b0393x7x
1.
Clutch engaged (switch open)
2.
Clutch disengaged (switch closed)
3.
Connector [95]
Trigger
Button
3
1
2
Summary of Contents for 2006LIGHTNING MODELS
