2006 Buell Lightning: Maintenance
1-45
HOME
10. Cycle the actuator to verify cable and valve operation:
a.
Hold the throttle wide open.
b.
Turn the engine cut-off switch to RUN.
c.
Turn the ignition/light key switch ON.
d.
Watch the actuator cycle close/open/close.
CAUTION
DO NOT start vehicle in this mode.
NOTE
In this mode the exhaust valve in the interactive muffler
should cycle from the closed position to the wide open posi-
tion and back to the closed. When the exhaust valve moves to
the open position, you should see the mark on the cable core
made previously. This ensures the system is working prop-
erly. If you do not see the mark, verify previous cable adjust-
ment.
11. See
Figure 1-50.
Verify that the interactive exhaust cable
(1) is routed behind the frame lug (2) before installing air
intake cover.
CAUTION
If cable is routed in front of the frame lug it will cause the
muffler valve to stay open not allowing it to work prop-
erly.
12. Install air intake cover. See
2.37 INTAKE COVER
ASSEMBLY
.
Figure 1-50. Correct Cable Routing Behind Frame Lug
10514a
1.
Interactive exhaust cable
2.
Frame lug
2
1
Summary of Contents for 2006LIGHTNING MODELS
