2-92
2006 Buell Lightning: Chassis
HOME
INTAKE COVER ASSEMBLY
2.37
REMOVAL
NOTE
The "X-Guard" on XB9SX is a non replaceable part.
1.
Remove seat. See
2.43 SEAT.
2.
See
Figure 2-121.
Remove fasteners and nylon washers
(2).
3.
Remove intake cover assembly (1).
INSTALLATION
1.
Position intake cover assembly over top of air cleaner
cover.
2.
See
Figure 2-121.
Start the front two fasteners (2) with
nylon washers.
3.
Install the remaining fasteners and nylon washers (2).
Tighten all fasteners to 12-36 in-lbs (1-4 Nm).
NOTE
Front screws go in at a slight angle.
1
1
WARNING
1
WARNING
After installing seat, pull upward on front of seat to be
sure it is in locked position. While riding, a loose seat can
shift causing loss of control, which could result in death
or serious injury. (00070a)
4.
Install seat. See
2.43 SEAT.
Figure 2-121. Intake Cover Assembly
1.
X-Guard (XB9SX only)
2.
Intake cover assembly
3.
Intake cover fasteners (4)
b1262x1x
3
3
2
1
3
3
Summary of Contents for 2006LIGHTNING MODELS
