User menu
Logamatic EMS RC35 user interface - Subject to technical modifications.
28
5
Names of the heating zones in the example in Fig. 2
When you enter settings for a particular heating zone, you first need to select it from the list. You will
then be asked to choose from a list of names as shown in Tab. 10.
Different temperatures for the heating zones (
Æ
Tab. 10, b) can also be entered using the RC35
user interface without a remote control unit, if your heating contractor has set it accordingly.
In that case, the room temperatures for the separate heating zone can be set via the User menu
(
Æ
page 38).
For heating zone 1+2:
Names of the heating zones
on the display
Set the room
temperature
a
Factory setting
HZ1+HZ2 =
RC35 heating zones
1)
1) Heating zone selection is not possible if there are no other heating zones available, such as DHW for
example.
page 14 – 16
b
Different room temperatures
are possible
2)
2) Here: setting by heating contractor HZ1 = RC35, HZ2 = none
HZ1 =
RC35 heating zones
HZ2 =
heating zone 2
HZ1: page 14 – 16
HZ2: page 16 or 38
Tab. 10 Names of the heating zones in the example in Fig. 2
