Logamatic EMS RC35 user interface - Subject to technical modifications.
23
User menu
5
5
User menu
5.1
Introduction to the User menu
The User menu allows you to enter certain settings. The procedure for operation is always the same:
1. Open the cover (by pulling the recessed grip on the left).
2. Press
to open the
USER MENU
.
3. Turn the dial
to change the selected item (marked with
).
4. Press
to make your selection.
5. To change the value, hold down the
button (the value starts flashing) and turn the dial
at the same time.
Release the button: the changed value is saved.
6. Press the
button to go back one step
-or-
press the
button several times or close the cover to return to the standard display.
Example:
Setting operating mode
continuous heating
for heating zone 1
Operating Instructions
Result
1.
Open the cover (by pulling the recessed grip on the left).
2.
Press
to open the
USER MENU
.
3.
Turn the dial
to the left until
modes of operation
is
selected (marked with
).
Tab. 7
How to use the User menu (example)
USER MENU
B
standard display
modes of operation
program
WWSD temperature
USER MENU
B
standard display
modes of operation
program
WWSD temperature
