Logamatic EMS RC35 user interface - Subject to technical modifications.
29
User menu
5
5.4
Adjusting the standard display
This menu item can be used to select the information to be displayed as the default in the upper row
of the display screen (the “standard display”).
1. Open the
User menu
.
2. Select
standard display.
You can choose from the following standard displays:
–
date + time
(factory setting)
–
outdoor temperature
(recorded outdoor temperature)
–
boiler temperature
(recorded boiler temperature, supply temperature)
–
DHW temperature
(in hot water storage tank)
–
collector temperature
(with solar heating systems only)
5.5
Selecting the operating mode
5.5.1 Operating modes for RC35 heating zones
For the
RC35 heating zones
, the operating mode can be set directly by pressing the
corresponding button (e.g.
). For other heating zones, use this menu item.
1. Open the
User menu
.
2. Select
modes of operation
.
3. If your heating system is equipped with more than one heating zone (
Æ
page 26): select the
desired heating zone and confirm.
4. Set the operating mode for the selected heating zone:
–
automatic
(program)
–
continuous heating
(manual day mode)
–
permanently setback
(manual night mode)
For more information on the operating modes, refer to page 13.
If there is only one heating zone installed and no DHW, heating zone selection is not
possible.
