Logamatic EMS RC35 user interface - Subject to technical modifications.
17
Basic operation
4
4.7
Setting the date and time
Your heating system requires the date and time to operate correctly. The clock keeps running for
about 8 hours in the event of a power failure. If a power failure lasts longer than that, the display will
indicate that you need to reset the date and time.
To set the date:
1. Open the cover (by pulling the recessed grip on the left).
2. Press
. The year starts flashing.
3. To set the year: hold down the
button and turn the dial at the same time.
4. Release the button. The year is saved.
5. Repeat steps 2 to 4 to set the month and day.
The set date is shown briefly. The standard display then re-appears.
To set the time:
1. Press
. The hours start flashing.
2. To set the hours: hold down the
button and turn the dial at the same time.
3. Release the button. The hours are saved.
4. Repeat steps 1 to 3 to set the minutes.
The set time is shown briefly. The standard display then re-appears.
