Revision 5
19
th
January 2021
Page | 14
EU DC Fast Charger (50kW & 100kW)
INSTALLATION AND USER’S MANUAL
This document is the
Property of BTCPower
Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
The outer packaging is made of 100% recyclable wood, the inner packaging is made of plastic
and must be disposed separately.
Type
W1 [mm]
D1 [mm]
D2 [mm]
D3[mm]
L [mm]
50kW
100kW
The legal minimum widths for escape routes must be respected in any case.
To allow easy replacement of the power-stacks, a clearance of at least 110cm must be
available on the left side (see D1).
At least a distance of 1100mm (D1) and 1000mm (D3) must be maintained in front of the
ventilation grilles to not impair the circulation of the supply and exhaust air. It must also be
prevented that the exhaust air is reintroduced into the supply air circuit.
Impairments to the air circulation may lead to a reduced efficiency of the charging station.
3.4.
Cable Reach
In its default configuration, the BTCP Charger comes with a cable length of 400cm. The following
figure shows the operating radius (4m) of the cables for the two DC outlets of the BTCP Charger.
Figure 7:
Cable reach for the two DC outlets of the BTCP Charger
