Clicking Logout will take you back to the sign-in screen.
Should the web server enablement time out, you won’t be able to
save changes – you’ll need to re-enable the web server through the
programming buttons.
The Default sub-menu gives you
the option to restore the unit to
factory settings by clicking Reset
to Defaults.
Logout
Web portal and Redcare app
The device menus are accessible via the Redcare web portal and app. When using the
web portal and app remotely after installation is completed then the following will apply.
Compliance with the user access level requirements of EN 50136
Access to the configuration options by an installer must be authorised by a level 2 user
e.g. site owner. For the Next Generation alarm transmission equipment compliance is
achieved at installation by requiring a one-time authorisation agreed as part of a
service level agreement.
It is recommended the signed authorisation is retained with the ‘as fitted’ documentation.
An example authorisation form is provided in the Appendix. To comply with EN 50136-2
Clause 5.2 Access levels, the PIN code access must be set to 6-digits. You can change the
access PINs in the USER settings. This applies for all types of access to the device.
55