To change the connection from
Ethernet to Wi-fi, select Wifi
and click Save. You’ll then see
additional options.
There are a number of ways of
connecting to wi-fi. Clicking
WPS will start a WPS session.
Press WPS on the customer’s
hub within two minutes. This
will disconnect the Essential IP
access point and, if successful,
connect to customer’s hub and
the Redcare platform
Clicking Search will initiate a
wi-fi network search. This will
disconnect the Essential IP
access point. Reconnect to the
access point – use the drop-
down arrow on the Select Wifi
Network box.
This will show you all the wi-fi
networks detected.
Select the network you need –
this will populate the SSID box.
Enter the customer’s hub wi-fi
password in the password box.
Scroll down and click save.
Or you can enter the SSID and
password in the boxes and click
save.
Disable the web server using
the programming buttons on
the unit, or wait for it to time
out. The unit will connect to
the customer’s hub and to the
Redcare platform.
46