Commissioning
B 3
ekrPro Com
60
web guide controller
EDV No.:
MD.191.01.05/1.6.x Chapter:
B 3
with analog sensors
Date:
23.11.2007
Page:
27/73
Choose standard system …
… & press F2 to activate
select a standard config.
Set.
De f.
F1 for fa ct. defaults
B 3.7.5 General Setup -
System
parameters
All of the parameters that have to be set up once when aligning the
system are contained in the
General set-up
.
The following procedures are provided for the different operating
modes.
However, the default values should be loaded before the special
parameters are set up. This will meet the condition for a
standardised basic output.
B 3.7.5.1
Setting the default values
1. Go to the
General set-up
menus and then select
Sel. Std.
System
2. Press the
F1
-key. The default settings will be loaded.
3. Press the
ESC
button to exit the window.
4. The application specific parameters can be set up now.
