3-16
Section 3
Fuel Systems
Hose Routing
The
Fuel System Diagram
in this section shows loca-
tions of the fuel tank, fuel fill, fuel tank vent, fuel level
sending unit, fuel withdrawal tubes, fuel shutoff valves,
fuel filters, and certain emission system components.
Fill Hose Replacement
Removal
Loosen the two hose clamps and remove the fill hose
from the elbow at the fuel tank. Remove the clamps
from the fill hose.
Loosen the two hose clamps and remove the fill hose
from the fuel fill and catch plate assembly. Remove
the clamps from the fill hose. Pull the fill hose from
under the deck slowly until it is completely free.
Installation
Route the new static-conductive fill hose under the fuel
fill and catch plate assembly until it reaches the elbow
on the fuel tank.
Transfer the flow-control valve to the new fill hose.
Match the original orientation of the valve exactly dur-
ing installation. Secure the fill hose to the tank elbow
with two hose clamps.
Attach the other end of the fill hose to the fuel fill and
catch plate assembly and secure with two hose
clamps.
!
WARNING
Do not allow any liquid gasoline to enter the
boat or accumulate in the bilge. Liquid gasoline
is a fire and explosion hazard. Gasoline vapor
is extremely flammable and highly explosive
under certain conditions.
Summary of Contents for 750 IMPACT
