Bruker B-ACS 120, Installation Manual

Page: 161 / 167

Installation Manual Version 001 BRUKER 161 (167)
Tables
1 Declaration of Conformity 7
2 Introduction 9
3 Safety Considerations 11
4 Mounting Instructions 13
5 Settings and Adjustments 27
6 Operating Instructions 37
7 Software Commands 41
Table 7.1. Standard Commands ..................................................... 42
Table 7.2. Bar Code Option Commands .......................................... 44
Table 7.3. Error Mode Commands .................................................. 45
Table 7.4. Diagnostic Mode Commands .......................................... 46
8 Special Tools 55
Table 8.1. Tools for mounting the Automatic Sample Changer ........ 55
9 Operator Maintenance 57
10 Technical Data 59
11 Circuit Diagrams 61
Table 11.1. Pin Assignment System Bus 85 ...................................... 66
Table 11.2. Pin Assignment: Power 5V/3A .......................... 68
Table 11.3. Pin Assignment: Display Board Connector ..................... 79
Table 11.4. Pin Assignment: Code Wheel Connector at Interface and De-
tector Board
80
Table 11.5. Pin Assignment: Horizontal Light Barrier ........................ 90
Table 11.6. Transmission Baud Rate for RS232 ............................... 95
Table 11.7. Pin Assignment: Sensor Connectors ............................ 100
12 Barcode Reader Option 109
Table 12.1. Serial Interface Switch Positions .................................. 116
Table 12.2. Label Printer Connected to ASPECT and Station .......... 116
Table 12.3. Label Printer Connected to IBM-PC ............................. 116