Bruker B-ACS 120, Installation Manual

Page: 3 / 167

Installation Manual Version 001 BRUKER 3
Contents
Contents ............................................................... 3
1 Declaration of Conformity ...................................... 7
2 Introduction ............................................................ 9
2.1 BRUKER Automatic Sample Changer .................................. 9
2.2 Site Considerations ............................................................. 9
2.3 Contact for Additional Technical Assistance ......................... 9
3 Safety Considerations ........................................... 11
3.1 Before Mounting the Automatic Sample Changer ............... 11
3.2 While Mounting the Column ............................................... 11
3.3 During Operation ............................................................... 11
3.4 Potentially Hazardous Areas .............................................. 11
3.5 Extreme Temperatures ...................................................... 12
4 Mounting Instructions .......................................... 13
4.1 Caution ............................................................................. 13
4.2 Preparing the Magnet for Installation ................................. 14
4.3 Connecting the Light Barrier Assembly .............................. 14
4.4 Mounting the Cabinet ........................................................ 15
4.5 Preparing the Column for Assembly ................................... 16
4.6 Assembling the Column ..................................................... 17
4.7 Mounting the Column Assembly to the Magnet ................... 18
4.8 Mounting the Pneumatic Arm Assembly ............................. 20
4.9 Securing the Bottom of the Column Assembly .................... 21
4.10 Connecting the Hoses and Cables ..................................... 22
Remote Hose Connections .............................................24
Connecting the Mains and RS232 Cable ........................25
4.11 Description of Input and Output Locations .......................... 26
5 Settings and Adjustments .................................... 27
5.1 General ............................................................................. 27
5.2 Mechanical Settings .......................................................... 27
Pneumatic Arm Adjustment ............................................29
Cabinet and Magazine Belt Adjustment ..........................31
Vertical Cylinder Adjustment ..........................................31
5.3 Fine Adjustment Procedures .............................................. 32
Settings at the Magnet ...................................................33
Settings at the Magazine ................................................34
Adjustment of the Tension of the Magazine Belt .............34
5.4 Pneumatic Cylinder Settings .............................................. 35