Bruker B-ACS 120, Installation Manual, Page: 112 / 167

112 (167) BRUKER Installation Manual Version 001
Barcode Reader Option
Figure 12.3. Location of the Guide and Drive Wheels
Mounting the Bar Code Pressure Reducer
Mount the Bar Code Pressure Reducer (with manometer) by placing it in the
round hole provided at the top of the cabinet (refer to
figures 12.2 and 12.4 ). Se-
cure the unit with the hexagon nut. Place the pneumatic hose connector with hose
onto the end of the bottom of the pressure reducer and screw it on tightly.
Connect the pneumatic hose (#0) from the bottom of the pressure reducer to the
pneumatic connector (position 0) on the
Valves and Motor Control Board .
Connect the second pneumatic hose (#0) from the Reader Unit to the upper pneu-
matic hose connector on the pressure reducer.
0
0
B-ACS 60
B-ACS 120
Drive Wheels Guide Wheels
Guide Wheels